Home › Connect › Antennas

Products · Connect

Antennas Ireland, matched to your router and your site.

TITAN IoT is the authorised Irish distributor for Poynting and Panorama antennas: 4G, 5G, GPS, Wi-Fi and LoRaWAN, for fixed sites, vehicles, cabinets and boats. Send us the router model and a photo of the site, and we’ll match the antenna, cable and connectors and stage them with your router in Galway.

Ask Us to Spec It  Antenna Guide

Poynting EPNT-4 antenna enclosure with an industrial router mounted inside

Find the Antenna for the Job

Five jobs cover most projects. Pick yours, or browse the full range below.

Poynting XPOL-1 5G cross-polarised omni antenna for fixed sites

Fixed Sites & Masts

Rural sites, CCTV masts and buildings at the edge of coverage. Omni for most sites; directional when the mast is far away and fixed.

XPOL-1 Omni  XPOL-2 Directional  OMNI-600

Poynting MIMO-4 9-in-1 vehicle antenna with 4x4 5G, Wi-Fi and GPS

Vehicles & Fleet

Roof antennas for buses, vans and emergency vehicles, with 4×4 MIMO cellular, Wi-Fi and GPS in one housing and one mount, and whip-mount Sharkees where a TETRA or UHF radio shares the roof.

MIMO-4  MIMO-3  Mako  Sharkee

Poynting PUCK-2 low-profile MIMO antenna for cabinets and machines

Cabinets & Machines

Low-profile, vandal-resistant antennas for roadside cabinets, digital signage, EV chargers and machines. One hole, no mast.

PUCK-2  Clam  PANL-401  B4BE

Poynting EPNT-2 antenna enclosure with room for the router inside

Router Inside the Antenna

The router mounts inside the antenna housing at height, so only Ethernet and power run back down. Long coax runs, and their loss, go away.

EPNT-4 Omni  EPNT-2 Directional

Poynting WaveHunter marine antenna for boats

Marine

Masthead antennas for boats in coastal waters, harbours and marinas, with the elevation coverage a moving deck needs.

OMNI-493  OMNI-402-5G  WaveHunter

Poynting CAB-093 low-loss antenna extension cable

Cables, Adapters & Advice

Low-loss extension cables, adapters and mounts to suit. Not sure which antenna? Send us the router model and a photo of the site.

CAB-093 Cable  Ask Us

New to antennas? Our guide covers frequency bands, gain, MIMO ports, cable loss and connectors. How to choose a 4G or 5G antenna ›

Need help choosing?

Read the antenna buying guide.

MIMO, XPOL, IP69K, how to match an antenna to your router, and how to choose for rural, marine and urban deployments in Ireland.

Browse the Antenna Buying Guide
Private LTE

Antennas for 400 MHz and 450 MHz Private LTE

Utilities and critical networks run private LTE in the 400 MHz and 450 MHz bands, often called LTE450, for long range and good building penetration. Antennas for these bands are physically larger, and gain is lower at the bottom of the range, so check the datasheet for your band.

Ask About 450 MHz

Covering 410 MHz and up

Poynting OMNI-600 — 2×2 MIMO mast omni

Poynting PANL-401 — 5-in-1 panel, 410–6000 MHz

Panorama 450 MHz range — single and multi-element, to order

Antenna Design Partner

Building Your Own Device?

For devices with an integrated antenna, such as medical equipment and compact sensors, we work with a specialist design partner on antenna selection, simulation and measurement inside your own housing. A small enclosure is the hardest place for an antenna, so bring the antenna in early, before range tests and certification.

Talk to Us About Your Device

Also to order

2J — compact wideband and 4×4 stud-mount antennas

Quectel — terminal-mount and embedded antennas for device builders

Panorama — the wider catalogue, any part number quoted

Related

Guides and Products That Go With It

How to Choose a 4G or 5G Antenna

Frequency, gain, MIMO, cable loss, connectors and site surveys, explained.

Read the Guide

Industrial Cellular Routers

4G and 5G routers from Robustel, Teltonika and Advantech to pair with the antenna.

View Routers

LoRaWAN Gateways

Gateway placement and antenna height decide LoRaWAN range.

View Gateways

Fitting a 4G or 5G Antenna

Five tips on height, interference, cable and connectors.

Read the Tips

Reading 4G Signal Strength

What the signal figures mean before you choose an antenna.

Read the Article

Marine Antennas

Choosing and fitting an antenna on a boat.

Read the Article

Fitting antennas to EV chargers? See the full router, antenna and SIM kit on our EV charger connectivity page.

FAQ

Antenna Questions, Answered

Which antenna do I need for my 4G or 5G router?

Start with the router: its frequency bands, the number of cellular ports and the connector type. Then look at the site. An omni antenna suits vehicles and areas with several masts; a directional antenna suits a fixed site at the edge of coverage. Match the antenna’s port count to the router and keep the cable short. Send us the router model and a photo of the site and we’ll match it.

Do I need a 4×4 MIMO antenna for a 5G router?

Yes, to get the speed the router is built for. A 5G router with four cellular ports uses four separate paths, and each one needs its own antenna element and cable. Connect only two and the router loses the other two paths and much of its throughput. A 4×4 MIMO antenna puts all four elements in one housing, so it is one mount and four cables.

Should I choose an omni or a directional antenna?

Omni for most jobs: it works in every direction, suits vehicles and areas with several masts, and needs no aiming. Choose directional when the site is fixed, the serving mast is known and the signal is weak, as at the edge of coverage. A directional antenna reaches further, but it has to be aimed at the mast and kept aimed.

How long can the antenna cable be?

As short as you can make it. Thin 5 mm coax loses about 0.6 dB per metre at 2.5 GHz, so a ten-metre run throws away roughly three-quarters of the signal. Use thicker low-loss cable for longer runs, or mount the router inside the antenna with a Poynting EPNT enclosure and run Ethernet down instead.

Which antennas cover 400 MHz and 450 MHz private LTE?

Private LTE in the 400 MHz and 450 MHz bands needs antennas built for those low frequencies. The Poynting OMNI-600 and PANL-401 cover from 410 MHz, with lower gain at that band than higher up, and Panorama offers a dedicated 450 MHz range to order. Check the gain at your band on the datasheet, or send us the frequencies and we’ll match the antenna.

Can TITAN help design an antenna into our own product?

Yes. For devices with an integrated antenna, such as medical equipment and compact sensors, we work with a specialist design partner on antenna selection, simulation and measurement inside your own housing. A small enclosure is the hardest place for an antenna, so bringing antenna design in early avoids failed range tests and certification delays later. Contact us with your device and the bands it needs.

Get the Antenna Right First Time

Tell us the router, the site and how far the antenna is from the equipment. We’ll match the antenna, cable and connectors, supplied from Galway.

Ask Us to Spec It  Call +353 91 757500

TITAN IoT Ltd · Racecourse Business Park, Ballybrit, Galway, H91 A9NN
+353 91 757500 · iot@titan.ie

Serving Ireland, the UK and Europe via the Vadnet IoT distributor alliance