Milesight EM500-SWL L005 Submersible Water Level Sensor (5 m)

  • Submersible pressure probe, 0–5 m water
  • ±0.5% FS accuracy, not affected by foam, wind or rain
  • Stainless steel IP68 probe, IP67 transceiver
  • LoRaWAN EU868, up to 10 years on one battery
  • Pole, wall or DIN-rail mounting

Product Inquiry

SKU: EM500-SWL-868M-L005 Category: Brand:

The Milesight EM500-SWL L005 measures water level with a pressure probe that sits at the bottom of the tank, well or channel. It reads 0 to 5 m of water and reports over LoRaWAN from a separate transceiver mounted above.

Why pick it

  • ±0.5% of full scale, and unlike sensors that look down from above it is not affected by foam, wind, rain or a narrow opening.
  • Stainless steel 304 probe rated IP68, with an IP67 transceiver for pole, wall or DIN-rail mounting.
  • One 19000 mAh cell: Milesight quotes up to 10 years at a 10-minute interval.

Suits water storage tanks, boreholes, rivers, wastewater and other liquids. Set up over NFC.

Works with any standard LoRaWAN gateway and network server, such as the Milesight UG65 indoors or the UG67 outdoors, with alerts and dashboards on IoT Factory.

Ranges: L003 (3 m), L005 (5 m) and L010 (10 m). Milesight can supply custom ranges on request.

EM500-SWL product page and datasheet (Milesight)

LPWAN

Technologies

LoRaWAN

Measure

,

Power

Mounting

DIN Rail, Pole, Wall

Product Type

Level Sensor

Model

EM500-SWL L005

Range

0 to 5 m H2O

Accuracy

±0.5% of full scale

Resolution

0.01 m

Frequency

EU868

Battery

19000 mAh ER34615 Li-SOCl2

Battery Life

Up to 10 years at 10-min interval (Milesight lab figure)

IP Rating

IP67 transceiver / IP68 probe

Probe

Stainless steel 304 · 140 x Ø28 mm

Operating Temp

-30 to +70 °C transceiver / -10 to +70 °C probe

Dimensions

Transceiver 105.4 x 71 x 69.5 mm

Enquire About This Product

Irish pricing, stock and advice — we reply the same working day.

    You may also like…