The Teltonika TSW202 is a managed industrial Ethernet switch with eight Gigabit PoE+ ports and two SFP fibre slots. It powers cameras, access points and other devices over the same cable that carries their data, and — unlike an unmanaged switch — it can be configured, segmented and monitored remotely through Teltonika RMS alongside your routers.
That combination is what makes it useful on an industrial site: a RUT or RUTX router brings the connection in over cellular, the TSW202 distributes it and powers the endpoints, and both appear on the same RMS dashboard rather than needing separate tools.
Where it’s used in Ireland
- Site CCTV — up to eight cameras powered and connected from one box, with PoE scheduling to power-cycle a frozen camera remotely instead of sending someone out
- Factory and process automation — PROFINET support for real-time communication with PLCs, drives and sensors on standard Ethernet cabling
- Wi-Fi deployments — powering access points across a warehouse, yard or building without running mains to each one
- Multi-tenant or segmented networks — VLANs keeping operational technology, CCTV and office traffic separate on shared cabling
- Sites needing fibre reach — the two SFP slots take standard 1000BASE modules for runs beyond copper’s 100 m limit
Managed versus unmanaged — which you actually need
An unmanaged switch is plug-and-play: power and ports, nothing to configure, nothing to go wrong. That is genuinely the right answer for most small installations, and it costs less.
Choose the managed TSW202 when you need one of these: VLANs to segment traffic, QoS to prioritise it, PROFINET for automation, PoE scheduling and per-port control, or remote management through RMS. If none of those apply, the unmanaged TSW200 has identical ports for less money — and we would rather tell you that.
Key features
- 8 × Gigabit Ethernet ports with PoE+ (IEEE 802.3af and 802.3at)
- Up to 240 W total PoE budget, up to 30 W per port
- 2 × SFP slots for fibre uplinks, accepting standard 1000BASE modules
- Layer 2 management with Layer 3 features — VLANs, QoS, port control
- PROFINET support for industrial automation networks
- PoE scheduling and per-port power control
- Teltonika RMS compatible — managed alongside your routers
- Rugged aluminium housing, IP30, wide operating temperature range
- DIN rail, wall or flat surface mounting
Key specifications
- Ports: 8 × RJ45 10/100/1000 Mbps with PoE+; 2 × SFP slots
- PoE: IEEE 802.3af / 802.3at; up to 30 W per port; 240 W total budget
- Power input: 44–57 V DC required for full PoE output
- Management: TswOS — VLANs, QoS, port mirroring, PoE scheduling, PROFINET; Teltonika RMS
- Housing: aluminium, IP30
- Mounting: DIN rail, wall or flat surface
- Power supply: sold separately — the PSU is sized to your PoE load, not bundled
Sizing the power supply — the detail people miss
Teltonika PoE switches ship without a power supply, deliberately, so the PSU matches the load. Four cameras drawing 10 W each need far less than a full eight-port deployment at 30 W a port. Tell us what you’re powering and we’ll specify the right PSU with the switch — the most common support call on PoE switches is a unit sized for the ports rather than the actual devices.
One caution for off-grid and vehicle work: these switches need a 48 V supply to deliver standard PoE. They do not step up from 12 V or 24 V, so a solar or vehicle installation needs a DC-DC converter in front of them. We’ll flag it if your application needs one.
The rest of the switch range
Teltonika’s switch family runs from compact unmanaged units through to managed models with fibre. If the TSW202 is more switch than you need — or not enough — ask us and we’ll spec the right one alongside your router.
Supplied and configured from Galway
TITAN IoT configures the TSW202 with the router it’s working alongside: VLANs applied, PoE ports set for the devices they’re feeding, and RMS enrolment done, so the network comes up as one system rather than a box of parts.
The TSW202 works with the industrial cellular routers we supply and the rest of the Teltonika range. Pricing is quoted per project — use REQUEST A QUOTE for Irish pricing, PSU recommendation and availability.
