TEK790 ATEX LPG Sensor
TEK822 NB-IoT/Cat-M1 LPG Sensor
NB-IoT/CAT-M1 Logger Exi With Rochester Gauge R3D
WLD2: Quad water leak detector
Quad water leak detector with WiFi and Ethernet
STE2 r2 Sensor
The HWg-ST2-R2 is a WiFi/Ethernet thermo- and hygrometer from HW group, which is equipped with 2x digital inputs and can be connected to up to 5x external 1-Wire and 1-Wire UNI sensors. It also has an internal WEB server with HTTPS support.
- 2x digital inputs and 5x external 1-Wire and 1-Wire UNI sensors
- Internal WEB server with HTTPS support
- Supports simultaneous use of Ethernet and WiFi
- Power supply via a 5V power supply or PoE
- Compatible with temperature, humidity, voltage, current, CO2, water leakage and air pressure sensors
R3000 LG-OG
The Robustel R3000 LG-OG is an IP67 outdoor LoRaWAN gateway.
4G LG3000 LoRaWAN GW
Industrial LoRaWAN Gateway.
4G R1520G Outdoor Router
IP67 rated outdoor router, ideal for adding Wi-Fi access at events
4G R1511P Embedded LTE Router
The R1511P Embedded 4G/LTE Router is a full-featured embedded 4G board.
TEK 871 NB-IoT/CAT-M1/2 ultrasonic level sensor ATEX
Ultrasonic 4G NB-IoT/CAT-M1 battery operated liquid level sensor
TEK811 Ultrasonic NB-IoT/CAT-M1
flexible and configurable battery operated liquid level sensor with an integrated Cellular modem
4G R2110 LTE-A Router
High Speed Smart LTE / LTE-A Router. Offering state-of-the-art mobile connectivity for IoT applications.
R5020 5G industrial Router with 4 ETH and PoE
The R5020 is an ultra-high-speed 5G NR (New Radio) Industrial Router in a compact industrial form factor, 4 Eth ports and WiFi Portal support targeting the global market.
5G’s gigabit speed and low latency are a real step towards massive IoT and enhanced mobile broadband (eMBB) applications.
The router supports fallback over LTE (LTE-A Pro) and 3G networks for areas where 5G coverage is not yet developed. Works on all Irish and European cellular Networks.
Free Remote monitoring with the RCMS cloud platform provided by TITAN
R5010 5G Router for IoT and industry
TITAN IoT new R5010 5G capable New Radio NRA router supporting 5G and 4G and 3G cellular connectivity. 5G gives new lower latency and Higher Speed with Robustels tried and tested high performance RobustOS 5 – an Operating System developed in-house by Robustel that has passed extensive 3rd party penetration testing. This device is perfect for any internet connectivity requirement, from office broadband to IoT and machine communications. Works on all Irish and European cellular Networks
Compatible with our secure VPN solution SmartnetVPN and external Poynting and Panorama antennas
Free Remote monitoring with the RCMS cloud platform provided by TITAN
HWG Temp-1Wire Pt100 – sensor
The Temp-1Wire Pt100 is a sensor from HW group that can be used to measure temperatures between -50 °C and 200 °C. It has a 3 meter long cable with an RJ11 connector and is compatible with many monitoring solutions from HW group.
- Sensor for measuring temperatures between -30 °C and 200 °C
- Features a 3 m long cable with an RJ11 (1-Wire) connector
- Is compatible with devices (e.g. Ares 12 LTE, STE2 r2, etc.) from HW group
- Particularly suitable for industrial applications (e.g. in cold rooms, warehouses, etc.)
HWG Sensor CO2 1W-UNI
The CO2 1W-UNI sensor is a compact temperature, humidity and NDIR CO2 sensor (Non-Dispersive Infrared ) from HW group, which is equipped with an RJ11 connector through which the data is transmitted. It is compatible with the Ares, Poseidon2, STE2-R2, SD-2x1Wire and NB-2x1Wire devices.
- Temperature, humidity and NDIR CO2 sensor
- Is equipped with an RJ11 connector
- Features a compact IP30 housing
- Can be mounted on walls
- Compatible with the STE2-R2, Poseidon2, Ares, NB-2x1Wire and SD-2x1Wire devices from HW group
- NDIR – Non-Dispersive Infrared, non-dispersive infrared sensor
HWG HTemp HomeBox
The HTemp HomeBox is a temperature and humidity sensor from HW group that is equipped with a 1-Wire RJ11 connection. It was developed for indoor use and is compatible with several remote monitoring devices from HW group
- Temperature and humidity sensor
- Is equipped with a 1-Wire RJ11 connector
- Designed for indoor use
- Features a compact IP30 housing
- Is compatible with Ares, HWg-STE2-R2, HWg-STE, Poseidon2, SD-2x1Wire, NB-2x1Wire devices
SD-2x1Wire Temperature and Humidity SensDesk Sensor
The SD-2x1Wire is a SensDesk sensor from HW Group that monitors the temperature and humidity in the environment. It is equipped with a WEB server and WiFi connectivity.
- Configuration via the SensDesk portal
- 5V or PoE power
- Connection with up to 4 sensors via 1 Wire Bus or 1Wire UNI Bus
- Built-in WEB server
Ares 12 LTE industrial monitoring unit
The Ares 12 LTE is an industrial monitoring unit from HW Group that can communicate via GSM and LTE. This monitoring unit is configured either via the USB interface, with a PC without additional software, or via the SensDesk portal in the “AresConf” tab.
- 14x 1-Wire UNI/1-Wire inputs and 2x digital inputs with SO pulse counter
- Data logger for over 250,000 recordings
- Connected via LTE and GSM/GPRS
- Digital inputs with 32-bit pulse counters that retain values even during power failures
- Internal back-up battery up to 24 hours
- Optional relay outputs with Relay Output 1W-UNI
- Available as a set and as a single device
STE2 LITE – Compact monitoring solution for
The STE2 LITE is a compact monitoring solution from HW group that allows you to monitor up to 4x RJ11 1-Wire sensors via LAN or WiFi. It can be used to measure the temperature in server rooms or warehouses and is supplied with a Temp-1Wire 1m temperature sensor.
- Compact monitoring solution
- Can monitor up to 4x RJ11 (1-Wire) sensors
- Allows measurements to be transmitted via LAN or WiFi
- Sends alarms when a defined limit is exceeded
- Is also compatible with the SensDesk.at online portal from HW group
Perseus Monitoring 150 HW Group rack mount
The Perseus Monitoring 150 is a rack monitoring solution from HW group that offers 8x RJ11 (1-Wire/1-Wire UNI) ports, 16x digital inputs (DI), 4x digital relay outputs (DO) as well as an RS-485 interface and a WLD port to facilitate the monitoring of network cabinets.
- Reliable rack monitoring solution
- Has 8x RJ11 ports for external 1-Wire/1-Wire UNI sensors
- Also offers 16x digital inputs and 4x digital relay outputs
- Also has a WLD port and an RS-485 interface
- Suitable for use in server rooms and data centers
Antenna LPB-6-60 B
Cost effective Omni-directional panel mount antenna B
EV8100 Elevator
FXS, VoLTE as a backup voice communication line, Backup battery inside, comply with EN 81-28 and AS
1735 standards
Free remote monitoring with the RCMS cloud platform provided by TITAN
DIGI IX30 LTE Router of Critical infrastructure
Intelligent 4G LTE router designed for critical infrastructure and industrial applications
- Global LTE and HSPA+ support and certification on major carrier networks around the world
- Ethernet, serial I/O and Modbus bridging
- Low-power feature can be easily configured for remote and off-grid applications
- Extremely resilient cellular connection through Digi’s patented SureLink®, VRRP+ protocol and dual SIM slots
- Dedicated GNSS receiver supporting GPS, GLONASS, BeiDou and Galileo
- License-free enterprise software: VPN, firewall, logging and authentication
- Digi Remote Manager® platform for easy setup, mass configuration and management
- Rugged enclosure, optimized for DIN rail or shelf mounting
- C1D2 and ATEX rated; NEMA TS2 temperature rated
- Digi WAN Bonding for 5G/LTE WAN aggregation and immediate failover
DIGI IX20 LTE Router
Versatile networking for critical applications — rugged, secure LTE router
- Compact and economical cellular routing platform with industrial feature set
- Redundant connectivity with dual SIMs and Digi SureLink®
- FirstNet Capable™ models for first responder communications
- Global bands support and options for global distribution, deployment and management
- Built-in Digi TrustFence® for device security, secure encrypted connections, ongoing monitoring and support
- Digi Remote Manager® platform for easy setup, mass configuration and management
- Dual Ethernet ports and single serial (RS-232) port
- Digi WAN Bonding for WAN aggregation and immediate failover
- Migrating from a WR-series device? Get information and tools to setup your new IX-series router.
DIGI IX10
LTE Cat 4 Global, Cellular Router with 1 x Ethernet, and RS-232/485
Wise Vibration Sensor
Wireless & Battery powered Condition Monitoring Sensor, LoRaWAN & NB-IoT
SmartNetVPN
Secure connectivity for you IoT assets, Rapid deployment providing dirct access to you devices
LR77 v2
4G Industrial Router
ATIM-Extended LoRaWAN network coverage
LoRaWAN coverage extender
ATIM-Relay
LoRaWAN sesnor with status detection & industrial metering